>Can you get to the other side without touching the sides?
1
>Get a base.
2
>Push a piece of maze wire into opposite corners of the base. Make sure that one corner is the battery corner.
3
>Get a piece of wand wire and make a loop in one end. Put the maze wire through the loop in the wand.
4
>Get a peice of link wire, strip the insulation from 5cm of one end and 2cm
of the other end. attach the 5cm stripped end to the want wire by wrapping it on and taping it.
5
>Pull out the battery end of the maze wire.
Put one of the wires of the light in the hole.
Put the other wire from the light into the battery slot.
Push the maze wire back into its hole.
6
>Place the link wire in the battery slot.
Put the battery in so that the lights wire is on one side, and the link wire is on the other.
If the light will not light up, take the battery out and flip it over.
7
>You can make the maze harder by making the maze wire really crookid and the wand loop really small. Try not to make your maze impossable!
