The something bot:
'Better
than the nothing bot, not as good as the everything bot.'
Sheet metal is EVIL and will cut
you if you give it half a chance.
Be really carefull of sharp corners and splinters with the flashing.
You will be fine.
Stuff list
- 2 regular sized hobby servos ($$)
- cardboard box about 12" x 8" x 6" (put everything in this box)
- 12" x 24" piece of unpainted aluminum flashing ( building
supplies / hardware store )
- 2 12" lengths of #6-32 (or m8) threaded rod from ( building
supplies / hardware store
)
- 50 nuts 6-32 or m8 as above
- Solderless breadboard (not a really short one, something like this)
($$)
- 6" bastard file with handle (building supplies / hardware store)
- 2 ~2.5" diameter rubber O rings about 1/8" thick
(automotive
parts shop)